1. The Importance of Maintenance

Whether you use your Viking throwing axe for sport or for survival, it’s important to keep it in good condition. Proper maintenance will not only help extend the life of your tool, but it will also ensure that it performs effectively every time you need it. Find extra and relevant information about the subject in this suggested external website. Understand more with this in-depth content, access additional details and new perspectives that will complement your reading and knowledge of the topic.

2. Oiling Your Axe

One of the most important aspects of Viking throwing axe maintenance is keeping the blade well-oiled. This will help prevent rust and corrosion, which can quickly degrade the quality of the steel.

Start by wiping down the blade with a clean cloth to remove any dirt or debris.

Next, apply a thin layer of oil to the blade with a soft cloth or brush.

Be sure to rub the oil into all the nooks and crannies of the blade to prevent it from drying out.

Store your axe in a dry place to prevent moisture from building up and causing rust.

3. Sharpening Your Axe

A sharp Viking throwing axe is essential for efficient use. Dull blades will not only make your tool less effective, but they can also be dangerous to use.

Choose a sharpening stone that is the appropriate shape and size for the blade of your axe.

Begin by holding the axe blade at a slight angle to the stone, and then use steady pressure to move the blade back and forth across the surface of the stone.

Be sure to maintain a consistent angle throughout this process to get an even sharpening on both sides of the blade.

After a few passes, flip the axe over and repeat the process on the other side.

Once you’re satisfied with the sharpness of the blade, rinse it off and oil it to prevent rust or corrosion.

4. Handle Maintenance

In addition to caring for the blade of your Viking throwing axe, it’s also important to maintain the handle. The handle of an axe can become worn, cracked or splintered over time.

If the handle becomes loose, it’s important to tighten the head back up.

If the handle is cracked, consider replacing it. It’s better to be safe than sorry when it comes to axe handle maintenance.

If your handle is worn, you can sand it down and apply a coat of oil to help protect it and prolong its life.

5. Storing Your Axe

When not in use, it’s important to store your Viking throwing axe properly to prevent damage and ensure it maintains its edge. : Broaden your knowledge of the subject covered in this article by visiting the suggested external website. Check now, discover valuable insights and fresh perspectives to further enhance your understanding of the topic.

Never store your axe in a wet or humid environment, as this can cause rust and corrosion.

Clean and oil your axe before storing it away.

Find a dry, cool location for safekeeping, one that’s out of direct sunlight.

If you use a sheath, take care not to damage the blade when putting it in.

In conclusion, keeping your Viking throwing axe in good condition is easy when you perform regular maintenance. With these tips and tricks, you can ensure your tool stays sharp, sturdy and effective for years to come.

Dive deeper into the subject with the related posts we’ve handpicked to enrich your reading:

Check out this related content

Read this external content